Air-Cooled | Water Chiller | Remote Condenser | 15 Ton

Air-Cooled | Water Chiller | Remote Condenser | 15 Ton

MGD-15A-RC
  • Used to cool fluids in support of industrial process cooling applications.
  • Include an internal pumping system and reservoir.
  • Placed inside the production facility while the remote air-cooled condenser is placed outside the production facility.
  • Refrigerant piping is installed from the chilling unit to the remote air-cooled condenser.
  • Process water lines are installed inside the facility.
Loading pricing...
Immediate Pricing
14.5 TonsCooling Capacity
36Gallons/Minute (GPM)
  • Specifications
  • Features
  • Options
  • Control Instrument
  • Support Documents

Specifications

Unit Cooling Capacity
Tons: 14.5
kW: 50.9
Compressor
Horsepower: 15
Quantity: 1
Type: Tandem Scroll
Condenser
Fan Quantity: 2
Ambient: 95°F
Refrigerant
Type: R-454B
Classification: A2L (Lower Toxicity, Mildly Flammable)
Low Global Warming Potential (GWP)
Process Pump
Horsepower: 3
GPM: 36
PSI: 55
Type: Centrifugal
Construction: Stainless Steel
Reservoir
Capacity: 65 Gallons
Construction: Non-ferrous Polyethylene
Process Connections
To Process: 2"
From Process: 2"
Water Make-Up: ½"
Full Load Amperage
230/3/60: 70
460/3/60: 35
575/3/60: 28
Dimensions
Height: 57"
Width: 33"
Depth: 80"
Weight
Shipping: 1,500 LBS
Specification Notes:
  1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
  2. Cooling capacity: Rated tons at 12,000 BTU/hr/ton @ 50°F LWT Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
  3. Ambient conditions for condenser: Loss of capacity and/or difficulty operating may occur at higher ambient temperatures. The minimum recommended ambient temperature is -20°F.
  4. Field charging by user required.
  5. Dimensions are approximate and should be confirmed with the factory prior to construction planning.

Remote Condenser RCSZ-15-KR

Quantity: 1

Specifications shown are per condenser unless otherwise noted.

Capacity
R-454B @ 1° TD: 11.7MBTU/hr
R-454B @ 1° TD: 16.51 Tons
Circuits Served
Maximum: 1
Fans
Quantity: 2
RPM: 1140
Connections
Gas: 2-1/8"
Liquid: 1-1/8"
Full Load Amperage
460/3/60: 5.4
Construction
Tube Materials : Copper
Fin Materials: Aluminum
Coating: None
Fins Per Inch: 12
Dimensions
Height: 54"
Width: 44-5/8"
Depth: 112-1/2"
Weight
Shipping: 680 LBS

Features

Refrigerant Circuit

  • R-454B refrigerant
  • Digital scroll compressor
  • Energy efficient capacity control from 20% – 100%
  • Brazed plate evaporator
  • Stainless steel plates
  • Copper brazing material
  • Refrigerant sight glass with moisture indicator
  • Filter-drier
  • Thermostatic expansion valve
  • Liquid line solenoid valve

Condenser

  • Air-Cooled
  • Remote, located outdoors
  • Heavy gauge galvanized steel cabinet on heavy duty legs
  • Enhanced copper tubing
  • with aluminum fins
  • Energy efficient motors
  • Direct drive fans
  • with quiet “swept wing” blades
  • Non-fused power disconnect
  • Condenser shipped separately and requires field installation.

Electrical

  • Nema 1 control cabinet
  • Branch Circuit Fusing
  • Compressor contactor
  • Process pump motor starter
  • Power entry terminal block
  • Fused transformer

Coolant Circuit

  • High flow centrifugal pump
  • Internal Reservoir
  • Insulated
  • Non-ferrous polyethylene construction
  • Reservoir lid is standard on this model
  • Automatic water make-up system
  • Standard NPT process fittings

System Limit Devices

  • High refrigerant pressure
  • Low refrigerant pressure
  • Process pump motor overload

Frame Construction

  • Compact physical size
  • Powder coated steel upright frame
  • Galvanized steel cross frame
  • Stainless steel sheet metal
  • Lift-off side panels
  • Polymer instrument bezel

Pressure Gauges

  • Pressure is shown on the MG instrument display
  • Refrigerant head

Warranty

  • 1 year covering parts and labor
  • Free preventative maintenance check in the 2nd year.
  • Warranty Document

Options

Electrical

  • Emergency Stop Button
  • UL508A Enclosed Electrical Panel

Control Instrument

  • MRC-1 Remote Located Control System
  • MRC-1 with Audible & Visual Alarms
  • Communications Upgrade : Modbus TCP

Alarms

  • Audible Alarm
  • Beacon Alarm

Coolant Circuit

  • Overhead Piping Kit
  • Reverse Flow Circuit
  • Process Line Shut Off Valves
  • Basket Strainer (cast iron)
  • Basket Strainer (non-ferrous)
  • Pump Upgrade to 5 HP
  • Pump Upgrade to 10 HP
  • Automatic Low Flow Bypass

Warranty

  • 4 year extended : 15 ton compressor (parts only)

Control Instrument

MG Series Control Instrument
  • Graphic LCD display with Intuitive Navigation
  • Digital refrigerant pressure display
  • Digital water pressure display
  • Plain language error message reporting
  • Controls hot gas bypass or digital scroll compressor for Capacity Control
  • Alarm output with audible signal
  • Industry 4.0 ready with Modbus RTU or SPI communication included, Modbus TCP communication optional
  • High water temperature shut down feature

Support Documents

Literature
Literature PDF for MGD-15A-RC
Download
Updated on March 2019
Manual
Operating Manual for MGD-15A-RC
Download
Updated on August 8, 2021