Process Pump

• Exclusive single piece high efficiency, high flow pump, motor & tank assembly
• High flow centrifugal pump and motor in one assembly
• Cast iron construction
• 3/4 horsepower with open drip proof motor
• Turbulence generated by high flow rates improves heat transfer and promotes better part quality
• Horizontal orientation and internal seal area flush extends pump seal life

Electrical

• DIN rail mounted UL approved finger safe electrical components
• Color coded & numbered wires are easy to identify for service purposes
• Control instruments are plug to plug for easy removal for service
• IEC motor starter with overload, phase loss & short circuit protection
• Rugged IEC mechanical heater contactor

Cabinetry

• Stainless steel electrical cabinet & enclosure panels
• 3″ casters for portability

Heater

• 34kw
• Low water density for long operational life
• High temperature rated stainless steel sheath minimizes damage from dissolved chemicals in water
• Flange mounted for easy service

Cooling Valve

• Solenoid cooling valve
• Pulsed cooling, controlled by the microprocessor instrument for precise temperature control

System Limits

• High temperature limit switch
• Control circuit fuse
• Process pressure relief valve
• Water supply switch prevents operation when water supply is below 60 psi

Pressure Gauges

• To process
• From process

Warranty (standard units)

• Pump Seal : Lifetime
• Control Instrument : 4 years
• Heater & Cooling Valve : 2 years
• Mechanical system : 2 years
• Warranty Document

System

• Mold purge
• Non-ferrous construction
• Rear panel cover
• Closed circuit cooling
• Closed circuit cooling with expansion tank
• Dual zone dolly
• Dual zone dolly with water manifold & electrical junction box

Electrical

• Solid state heater contactor
• Power cord for unit with full load amps between 35 and 56

Other Pumps

• 1 HP @ 45 GPM Changes model to: SRT-3445-300
• 1.5 HP @ 65 GPM Changes model to: SRT-3465-300
• 2 HP @ 75 GPM Changes model to: SRT-3475-300
• 3 HP @ 80 GPM Changes model to: SRT-3480-300
• 5 HP @ 90 GPM Changes model to: SRT-3490-300
• 7.5 HP @ 100 GPM Changes model to: SRT-34100-300

Other Heaters

• 10kW Changes model to: SRT-1035-300
• 16kW Changes model to: SRT-1635-300
• 24kW Changes model to: SRT-2435-300

Control Instrument

• Communications Upgrade : Modbus TCP
• Euromap 66
• OPC UA – Euromap 82.1 Communications
• Remote start
• Remote start – stop with remote set point and second set point
• MRC-2 remote located control system for 2 temperature control units.
• MRC-3 remote located control system for 1 temperature control unit
• MRC-3 remote located control system with alarm and alarm silence switch

Alarms

• Audible alarm (high db)
• Beacon alarm

Probes

• Calibration Certificate

Cables

• Second set point cable – 20′
• Remote set point cable – 20′
• SPI/Modbus communications cable with DB9 connector – 20′
• XK / MRC cable

• Touch screen simplicity
• 4.3 inch full color touch screen interface
• More than 15 screens with custom set-up, operation & system monitoring information.
• Home screen includes continuous setpoint and to process temperature.
• Digital flow rate display and from process temperature on informational screen.
• % Heating or Cooling indication on home screen.
• Standard shut down pump seal cooling feature.
• User configurable automatic start-up venting.
• Out-of-spec alarm including standard audible signal.
• Pump rotation monitor.
• Selectable SPI or Modbus RTU communication.
• Optional Modbus TCP communication.
• Optional: OPC UA via Ethernet, Euromap 82.1 communication.
• Operates exclusive AVT modulating cooling valve.
• Drop in replacement for older Advantage HE series control instrument.
• Selectable English or Spanish language display
• Selectable °F or °C temperature display
• For process fluid temperature up to 250°F
• Optional : High temperature fluid capability to 300°F
• Optional : 2nd setpoint cable 20ft length