Process Pump

• 5 HP provides 70 GPM at 28 PSI
• Low pressure, high flow centrifugal pump eliminates high pressure safety concerns
• Custom designed pump casings produce higher flow with less horsepower
• Water cooled pump seal maintains seal integrity and lengthens service life
• Seal cooling is provided by facility water circulated within a cast jacket surrounding the seal area

Process Connections

• Female NPT fittings standard on all process connections
• To and From Process connections supplied with shut off valves
• Supplied with manual process fluid purge system allowing purging of the process for storage within the unit expansion tank. Requires low pressure compressed air source for operation.

Cabinetry & Frame

• Stainless steel enclosure panels
• Hinged electrical panel

Heater

• 48 kW
• Flange mounted reduces leak potential
• Vertically mounted for easy servicing
• Uses a steel heater sheath for a long life at high fluid temperatures

Cooling Circuit

• A water to oil heat exchanger is used to cool the circulated fluid
• Cooling water flow to the heat exchanger is regulated by a solenoid valve controlled by the microprocessor control instrument

Expansion Tank & Reservoir

• Large capacity expansion tank allows roomfor thermal expansion
• Tank is used for fluid storage during shut down
• Vent protects against unit over pressurization
• Sight glass for visual monitoring of fluid level
• Convenient fill port on top of tank

System Limits

• High temperature
• Water supply pressure switch
• Water supply pressure relief valve
• Pump motor overload relay
• Fused control circuit

Pressure Gauge

• To process

Warranty

• 1 year covering parts and labor
• Warranty Document

Control Instrument

• Modbus TCP/IP RJ45
• T500 control instrument
• MRC-2 remote located control system for 2 temperature control units.
• MRC-3 remote located control system for 1 temperature control unit
• MRC-3 remote located control system with alarm and alarm silence switch

Cooling Circuit

• Larger heat exchangers available for added capacity

Alarms

• Audible Alarm
• Beacon Alarm

Frame Construction

• Rear cover panel

• Easy to use menu driven controller
• LCD display
• Home screen includes continuous set point and to process temperature.
• % Heating or Cooling indication on home screen.
• Out-of-spec alarm including standard audible signal.
• Selectable °F or °C temperature display.
• Selectable SPI or Modbus RTU communication.
• For process fluid temperature up to 500°F
• Optional: Modbus TCP communication