Pump Tank Station | 275 Gallon Capacity

Model PTS-275 shown. Image shown is typical. Actual unit appearance will vary according specifications and options.

PTS-275

These ready-to-run pump tanks are built from heavy-gauge steel and strengthened with perimeter reinforcement. Custom options are available to meet your specific application requirements.
Available for tower water systems (PTS) and chilled water systems (CPTS).
Advantage offers PTS/CPTS systems in capacities from 275 to 3000 gallons.

Loading pricing...

Request A Price

275 GallonsReservoir Capacity

Reservoir Construction

Material: Epoxy Coated Mild Steel

Reservoir Capacity

To Overflow: 275 Gallons
Operating (Tower): 180 Gallons
Operating (Chiller): 210 Gallons

Maximum Recommended Flow

Total Flow: 250 GPM

Connection Sizes

Water Make-Up: 1"
Drain: 1½"
Overflow: 4"

Dimensions

Height: 55"
Width: 60"
(tank) Depth: 24"
(2 pumps) Depth: 60"

Weight

Tank Only (dry): 1,625 LBS
Tower (operating): 3,126 LBS
Chiller (operating): 3,376 LBS
To Overflow: 3,918 LBS

Specification Notes:

Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Consult factory for assistance selecting pumps for your application.
Dimensions are approximate and should be confirmed with the factory prior to construction planning.

Pumps

Careful consideration to service, efficiency and motor protection are central to the design and selection of each pump
Nominal flow rates are 2.4 gallons per minute per ton for chilled water systems and 3 gallons per minute per ton for cooling tower systems
Process pumps are selected to provide 45-65 pounds per square inch of pressure
High efficiency centrifugal pumps are used for high flow to promote heat transfer
Full pump trim including suction & discharge valves are included and is constructed of Schedule 80 PVC or welded steel depending on pipe size and duty
Pumps providing higher flow rates and/or higher pressure are available
A pump discharge pressure gauge as well as starter and motor protection are included, assuring the pump tank station performs optimally and reliably

Variable Speed Drives

When used for pump control a pressure transducer senses process pressure and provides feedback to the drive to adjust the process flow rate to meet the current system needs
When used for cooling tower fan control a temperature transmitter senses the process water temperature and provides feedback to the drive to adjust the fan speed to meet the current cooling needs of the system
Based on settings, automatically uses the minimum energy necessary for the system saving energy, wear and money
A 20% motor speed reduction can save nearly 50% in pumping or fan energy