Glycol Chiller | 3 Horsepower | Indoor Unit

Home » Glycol Chillers Designed for Breweries & Distilleries » Indoor Glycol Chiller Units Designed for Breweries and Distilleries » Glycol Chiller | 3 Horsepower | Indoor Unit

Model BG-3A shown. Image shown is typical. Actual unit appearance will vary according specifications and options.

Glycol Chiller | 3 Horsepower | Indoor Unit

BG-3A

Air-cooled glycol chillers are purpose built for the unique requirements of breweries and distilleries.
Set up for low temperature operation and high flow, the glycol chiller is designed to circulate glycol through fermentation tanks, conditioning tanks, wort chiller and storage rooms.
Temperature control is achieved by using a “tailor made” microprocessor control instrument designed and manufactured exclusively for this glycol chiller.
This glycol chiller is designed to be located indoors.
The electrical cabinet is NEMA 1 rated.
A rugged frame supports the the components in these glycol chillers.
Shipment is made via enclosed trailer.
This glycol chiller is designed for indoor installation.

Loading pricing...

Request A Price

17,992Cooling Capacity BTU

3Compressor HP

7.2Gallons/Minute (GPM)

Specifications
Features
Options
Control Instrument
Support Documents

Specifications

Cooling Capacity

Glycol Temperature @ 25°F: 17992 BTU/hr
Glycol Temperature @ 50°F: 34800 BTU/hr

Compressor

Horsepower: 3
Type: Scroll

Air-Cooled Condenser

Type: Fan
CFM: 3000
Ambient: 90°F

Evaporator

Type: Brazed Plate

Refrigerant

Type: R-513A
Classification: A1 (Non-Flammable)
Low Global Warming Potential (GWP)

Process Pump

Horsepower: ¾
Flow: 7.2 GPM

Reservoir Capacity

Capacity: 7 Gallons
Lid: Standard

Process Connections

To Process: 1"
From Process: 1"

Full Load Amperage

230/3/60: 33
460/3/60: 23
575/3/60: 11

Dimensions

Height: 43"
Width: 34"
Depth: 40"

Weight

Shipping: 600 LBS

Specification Notes:

Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Cooling capacity: Rated tons at 12,000 BTU/hr/ton. The minimum recommended operating temperature when no glycol is used is 48°F.
Ambient conditions: Loss of capacity and/or difficulty operating may occur at higher ambient temperatures. The minimum recommended ambient temperature is 60°F.

Features

Refrigerant Circuit

R-454B refrigerant
Scroll compressor
Microprocessor controlled 50% hot gas by-pass capacity control system
Suction service valve
Discharge service valve
Air-Cooled condenser
Internal to Unit
Fan induced air flow
Brazed plate evaporator
Stainless steel plates
Copper brazing material
Refrigerant sight glass with moisture indicator
Filter-drier
Thermostatic expansion valve
Liquid line solenoid valve

Electrical

Nema 1 control cabinet
Branch Circuit Fusing
Process pump motor starter
Compressor contactor
Power entry terminal block

Coolant Circuit

High flow centrifugal pump
Internal Reservoir
Insulated
Non-ferrous polyethylene construction
Reservoir lid is standard on this model
Reservoir level sight glass
Standard NPT process fittings

System Limit Devices

High refrigerant pressure
Low refrigerant pressure
Process pump motor overload

Frame Construction

Stainless steel cross frame
Powder coated steel cabinetry
Lift-off side panels
Castors – for portability
Designed for indoor installation

Warranty

1 year covering parts and labor
Warranty Document

Options

Electrical

Emergency Stop Button

Alarms

Audible Alarm
Beacon Alarm

Control Instrument

MG Series Control Instrument

Graphic LCD display with Intuitive Navigation
Digital refrigerant pressure display
Digital water pressure display
Plain language error message reporting
Controls hot gas bypass or digital scroll compressor for Capacity Control
Alarm output with audible signal
Industry 4.0 ready with Modbus RTU or SPI communication included, Modbus TCP communication optional
High water temperature shut down feature