Central Chilling Module | 60 Ton | Air-Cooled

Home » Central Water Chillers » Air-Cooled Central Chiller Split Modules » Central Chilling Module | 60 Ton | Air-Cooled

Model C-60APT-RC shown. Image shown is typical. Actual unit appearance will vary according specifications and options.

Central Chilling Module | 60 Ton | Air-Cooled

C-60APT-RC

Air-cooled central chilling module use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications.
20°F to 70°F process fluid temperature range.
This chiller combines one or more refrigeration circuits to chill fluid. A separate reservoir and pumping system is required to circulate chilled fluid to the use points.
Air-Cooled chillers use ambient air to dissipate the heat from the refrigeration system.
The refrigeration system and controls remain inside while the remote air-cooled condenser is located outside.

Loading pricing...

Immediate Pricing

57 TonsCooling Capacity

1# of Zones

144 GPMProcess Flow

Specifications
Features
Options
Control Instrument
Support Documents

Specifications

Refrigerant Zones

Quantity: 1

Capacity

Tons: 57.33

Compressor

Type: Tandem Scroll

Refrigerant

Type: R-454B

Connection Sizes

To Process: 3"
From Process: 3"

Full Load Amperage

230/3/60: 264
460/3/60: 132
575/3/60: 106

Dimensions

Height: 57"
Width: 36"
Depth: 84"

Weight

Shipping: 1,400 LBS

Specification Notes:

Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Cooling capacity: Rated tons at 12,000 BTU/hr/ton @ 50°F LWT Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
Ambient conditions for condenser: Loss of capacity and/or difficulty operating may occur at higher ambient temperatures. The minimum recommended ambient temperature is -20°F.
Field charging by user required.
Dimensions are approximate and should be confirmed with the factory prior to construction planning.

Remote Condenser RCSZ-60-KR

Quantity: 1

Specifications shown are per condenser unless otherwise noted.

Capacity

R-454B @ 1° TD: 46.43MBTU/hr
R-454B @ 1° TD: 61.91 Tons

Circuits Served

Maximum: 1

Fans

Quantity: 5
RPM: 1140

Connections

Gas: 2-5/8"
Liquid: 2-1/8"

Full Load Amperage

460/3/60: 14.7

Construction

Tube Materials : Copper
Fin Materials: Aluminum
Coating: None
Fins Per Inch: 19

Dimensions

Height: 54"
Width: 44-5/8"
Depth: 277-1/2"

Weight

Shipping: 1950 LBS

Features

Refrigerant Circuit

R-454B refrigerant
Scroll compressor
Microprocessor controlled 50% hot gas by-pass capacity control system
Suction service valve
Discharge service valve
Brazed plate evaporator
Stainless steel plates
Copper brazing material
Refrigerant sight glass with moisture indicator
Filter-drier
Thermostatic expansion valve
Liquid line solenoid valve

Condenser

Air-Cooled
Remote, located outdoors
Heavy gauge galvanized steel cabinet on heavy duty legs
Enhanced copper tubing
with aluminum fins
Energy efficient motors
Direct drive fans
with quiet “swept wing” blades
Non-fused power disconnect
Condenser shipped separately and requires field installation.

Electrical

UL listed electrical components
Nema 1 control cabinet
Process pump motor starter
Compressor contactor
Power entry terminal block
Branch Circuit Fusing
Fused transformer

Pressure Gauges

Refrigerant (per zone)
Refrigerant head
Refrigerant low
Coolant
To Process

System Limit Devices

Refrigerant (per zone)
High refrigerant pressure
Low refrigerant pressure
Coolant
Coolant freezestat
Evaporator flow

Alarm

Beacon with audible alarm sound

Warranty

1 year covering parts and labor
Warranty Document
Free preventative maintenance check in the 2nd year.

Options

Refrigerant Circuit

Compressor hour meters (quantity: 2)

Electrical

Line Voltage and Phase Monitor

Control Instrument

Remote display with 20′ cable
Modbus TCP/IP RJ45

Control Instrument

MZC Series Control Instrument

Microprocessor based multizone controller
Independent intelligent zone boards
Compressors are staged individually
Continuous To Process temperature display
Continuous Setpoint temperature display
Selectable from process temperature display
Large temperature display windows
°F or °C temperature display
Refrigerant circuit indicator lights for
– Probe
– Low Flow
– High Pressure
– Low Pressure
– Compressor
– Freezestat
– Capacity Control
Water circuit indicator lights for
– Temperature Deviations
– Low Pressure
– Tank Level
– Probe, Phase
Selectable lead – lag mode
Soft Key Operators
SPI communications
Audible and visual alarm