Temperature Control Unit | 16kW 100 GPM

Click here for an Instant Price Quote

For The SK16100-T300 ►

OVERVIEW

Water temperature control units circulate temperature stabilized water through the process for process temperature control.
The temperature control range of this unit is 32°F - 300°F.
A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature.
This temperature control unit requires a plant water supply source.
Advantage temperature control units are portable, built on casters to easily move the unit between processes.
Units are available with a variety of different control instruments, heater sizes, cooling valves and physical packages.

PRICING

SPECIFICATIONS

Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
2. Derate heater output by 25% for 208/3/60 operation.
3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
4. Consult factory for 50HZ operation.
5. Unit weight crated for shipment.
6. The Sentra cannot achieve temperatures below the cooling water supply temperature and will provide warmer water to process compared to the cooling water temperature even with the cooling valve fully open. Consult Factory for more information.

FEATURES

Process Pump:
7.5 HP process pump
Stainless steel shaft
Horizontal motor extends bearing and seal life
ODP (open drip proof) motor
Pump seal flush line
Custom designed impeller and casing
High grade mechanical contactor with over current, phase loss and short circuit protection

OPTIONS

CONTROL INSTRUMENT

Touch screen simplicity
4.3 inch full color touch screen interface
More than 15 screens with custom set-up, operation & system monitoring information.
Home screen includes continuous setpoint and to process temperature.
Digital flow rate display and from process temperature on informational screen.
% Heating or Cooling indication on home screen.
Standard shut down pump seal cooling feature.
User configurable automatic start-up venting.
Out-of-spec alarm including standard audible signal.
Pump rotation monitor
Selectable SPI or Modbus RTU communication.
Optional Modbus TCP communication.
Drop in replacement for older Advantage 300°F series control instrument.
Selectable English or Spanish language display
Selectable °F or °C temperature display
For process fluid temperature up to 300°F
Optional : 2nd setpoint cable 20ft length

SUPPORT DOCUMENTS

Temperature Control Unit : Water