Temperature Control Unit : Water

• Water temperature control units circulate temperature stabilized water through the process for process temperature control.
• The temperature control range of this unit is 32°F - 250°F.
• A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature.
• This temperature control unit requires a plant water supply source.
• Advantage temperature control units are portable, built on casters to easily move the unit between processes.
• Units are available with a variety of different control instruments, heater sizes, cooling valves and physical packages.

SK-1635-LE
• Heater (2)
• kW : 16
• Process Pump
• HP : 3/4
• GPM : 35
• PSI : 30
• Cooling Valve
• Type : Modulating
• Size : 1/2"
• Control Instrument
• Control : LE Series
• Maximum Temperature : 250°F
• (6) Minimum Temperature : 32°F
• Construction
• • Nema 1 control cabinet with branch circuit protection
• • ABS facia with stainless steel enclosure panels
• Full Load Amperage (3)
• 230/3/60 : 42.2
• 460/3/60 : 21.1
• 575/3/60 : 17.6
• Connection Sizes
• To Process : 1-1/4"
• From Process : 1-1/4"
• Water Supply : 1/2"
• Drain : 1/2"
• Dimensions
• Height : 28-1/4"
• Width : 12-1/2"
• Depth : 19-1/2"
• Weight (5)
• Shipping : 205 lbs
• Warranty
• • 2 years covering heater & cooling valve
• • 4 years covering LE Series control instrument
• • Lifetime covering pump seal (parts only)
• • 2 years covering balance of machine

• Specification Notes:
• 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
• 2. Derate heater output by 25% for 208/3/60 operation.
• 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
• 4. Consult factory for 50HZ operation.
• 5. Unit weight crated for shipment.
• 6. The Sentra cannot achieve temperatures below the cooling water supply temperature and will provide warmer water to process compared to the cooling water temperature even with the cooling valve fully open. Consult Factory for more information.

• Manual
• 
• Download
• 96 pages
• 3.1 MB

Model SK-1635-LE shown.

Image is typical. Actual unit appearance will vary according to specifications and options.

-