Water Chiller | Central Unit | 30 Ton Water-Cooled
TI-20W
Click Here for An Immediate Factory Pricing Quote For the TI-20W ▶
Pricing Is Now On Display
Product Overview
Air-cooled central chillers use mechanical refrigeration to cool recirculated fluid that support industrial process cooling applications.
20°F to 70°F process fluid temperature range.
Titan systems combine one or more refrigeration circuits with a large capacity reservoir and pumping system assembled on a single skid for low ease of installation.
Water-cooled chillers require a secondary water source (typically cooling tower water) to dissipate the heat from the refrigeration system.
Assembled from known reliable and long service life components, this water chiller will operate efficiently for many years in many types of industrial environments.
Price is Loading
Specifications
Model: TI-20W (1)
Refrigerant Zones
Quantity : 2
Compressor
Quantity : 2
Horsepower : 10
Type : Scroll
(2)Total Capacity : 20.5 tons
Refrigerant
Type : R-410A
Water-Cooled Condenser
(3)City Water : 31 GPM
(4)Tower Water : 61 GPM
Process Pump(5)(6)
Horsepower : 5
GPM : 48
PSI : 60
Evaporator Pump(5)(6)
Horsepower : 1.5
GPM : 55
Full Load Amperage(7)(8)
230/3/60 : 106.0
460/3/60 : 53.0
575/3/60 : 43.0
Reservoir Capacity
Operating : 340 gallons
Holding : 400 gallons
Connection Sizes
To Process : 2"
From Process : 2"
Water Make-Up : 1"
Overflow : 4"
Condesner : 2"
Dimension
Height : 82"
Width : 87"
Depth : 96"
Weights
(9)Shipping : 3,550 lbs
Operating : 7,925 lbs
Specification Notes:
Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ 105°F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40. The minimum recommended operating temperature when no glycol is used is 48°F.
Flow rate (GPM) is based on 60°F city water source with a clean condenser.
Flow rate (GPM) is based on 85°F tower water source with a clean condenser.
Consult pump curve for exact pump performance.
Selection of optional pumps for higher flow rates will raise the minimum recommended operating temperature when no glycol is used.
Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.