Air-Cooled Glycol Chiller

Click here for an Instant Price Quote

For The OACS-105S-MZC-2P-BC ►

• Advantage OACS air-cooled central chillers use mechanical refrigeration to cool recirculated fluid that support industrial process cooling applications.
• 20°F to 70°F fluid temperature range.
• OACS air-cooled glycol/water chillers use ambient air to dissipate process heat and efficiently runs in air temperature between -20°F to 95°F.
• OACS systems are designed for outdoor installation in most types of climates. The air-cooled condenser, chiller zones, reservoir and pumping system are delivered as a complete package.

• Model: OACS-105S-MZC-2P-BC (1)
• Refrigerant Zones
• Quantity : 1
• Capacity
• (2) BTH @ 25°F : 612,000
• (3) BTH @ 50°F : 1,224,000
• Compressor
• HP : 105
• Type : Rotary Screw
• Refrigerant
• Type : HFC-407C
• Air-Cooled Condenser
• # of Fans : 10
• Evaporator
• Type : Shell & Tube
• Process Pump
• (4) HP : 20
• (5) GPM : 245
• PSI : 65
• Evaporator Pump
• (4) HP : 7.5
• (5) GPM : 245
• Standby Pump
• Offered : Available
• Reservoir Capacity
• Capacity : 350 gal
• Construction : Stainless Steel
• Process Connection
• Size & Type : 4" Flange
• Dimensions (6)
• Height : 99"
• Width : 90"
• Length : 300"
• Controller
• Instrument Type : MZC
• System Amperage (7)
• 460/3/60 : 291.0

• Specification Notes:
• 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
• 2. Capacity at 25°F LFT and 115 °F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. The minimum recommended operating temperature when no glycol is used is 48°F.
• 3. Capacity at 50°F LFT and 115 °F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. The minimum recommended operating temperature when no glycol is used is 48°F.
• 4. Consult pump curve for exact pump performance.
• 5. Selection of optional pumps for higher flow rates will raise the minimum recommended operating temperature when no glycol is used.
• 6. Approximate dimensions. Not for construction purposes.
• 7. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
• 8. See Product Warranty Statement W-700 for details on warranty.

• Literature
• 
• Download
• 4 pages
• 864 KB

• Literature
• 
• Download
• 2 pages
• 442 KB

• Manual
• 
• Download
• 88 pages
• 9.5 MB

OACS-105S-M1-1P-BC shown

Image is typical. Actual unit appearance will vary according to specifications and options.