Water Temperature Control Units circulate water through a process application for temperature control.

These temperature control units offer:
   • Stainless steel cabinetry
   • High capacity centrifugal pumps
   • Stainless steel heaters
   • Microprocessor controllers
   • Modulating or Solenoid cooling valves
   • Process Pressure Gauges
   • 4 Year Mechanical Warranty
   • 4 Year Instrument Warranty
   • Lifetime Pump Seal Warranty

The AVT™ or PVT™ COOLING VALVES use in our temperature control units are designed for heavy use in industrial environments and are microprocessor controlled. They provide the "straight line" temperature control our units are known for.

Each temperature control unit is portable, to be moved between applications as necessary. The control instruments for each unit is designed and manufactured by ADVANTAGE.

Use these temperature control units on
Molds, Dies, Heat Exchangers, Rolls
and many other applications.

MANY OPTIONS
A wide range of options can customize each unit to any particular application.

• 300°F Instrument
• Audible & Visual Alarm Packages
• Larger Cooling Valves
• Mold Purge
• Stacking Stands
• Closed Circuit Kits
• Bronze Pumps
• Non-ferrous Units
• Dual Zone Dolly
• Modbus Communications ('HE' only)
• Remote Instruments ('HE' only)

Compare the mechanical components used in our temperature control units.
CLICK HERE

Compare the Instruments used in our temperature control units.
CLICK HERE

* Sentra units use an external source of water for cooling. The lowest achievable temperature will depend on cooling load, incoming water temperature and water pressure differential. Contact your Advantage representative for application assistance. The lowest obtainable temperature for units using a VE control instrument is approximately 30°F above the incoming water temperature. The lowest obtainable temperature for 'LE' & 'HE' units is approximately 10°F.