- 877-290-1853
Search
To see IMMEDIATE online pricing, please complete the form below for the RK-1230HCA
Pricing will be displayed on our website when you fill out the form below and click Get Pricing Now.
Temperature Control Unit : Oil Unit
Model: RK-1230HCA
Click here to Request
Factory Price Quote ►
- Oil temperature control units circulate oil through the process and are used for applications were the required temperature ranges from 100° to 500°F.
- These units use a high flow pump to circulate high temperature oil through the process. A heater elevates the temperature of the oil. Cooling is provided through the use of an optional heat exchanger.
- Units are available with a variety of control instruments, heaters sizes, cooling heat exchanger sizes, and physical packages.
- This model is equipped with a high temperature air-cooled heat exchanger to provide process cooling. A fan exhausts the process heat to the ambient air.
RK-1230HCA- Heater (2)
- kW : 12
- Process Pump
- HP : 1
- GPM : 30
- PSI : 24
- Fluid Volume (6) (7)
- Unit : 3 gal
- Expansion Tank : 2 gal
- Maximum : 13 gal
- Full Load Amperage (3)
- 230/3/60 : 34.8
- 460/3/60 : 17.9
- 575/3/60 : 14.3
- Control Instrument
- Type : Regal G500 Series
- Temperature Range : 100°F - 500°F
- Connection Sizes
- To Process : 1"
- From Process : 1"
- Dimensions
- Height : 60"
- Width : 24"
- Depth : 52"
- Weight (5)
- Shipping : 600 lbs
- Specification Notes:
- 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
- 2. Derate heater output by 25% for 208/3/60 operation.
- 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
- 4. Consult factory for 50HZ operation.
- 5. Unit weight crated for shipment.
- 6. Maximum Total System @ 15% expansion = unit volume plus piping and prodcess volumes. Typical fluid expansion rates:
a. Paratherm OR : 4.00% per 100°F
b. Paratherm NF : 3.04% per 100°F
c. Multitherm PG-1 : 3.10% per 100°F
d. Calflo FG : 5.62 per 100°F - 7. Do not use Multitherm 603.
- Tank Construction:
- Twin Tanks - separate heating and suction tanks
- Large capacity expansion tank
- NPT process connections
- Process line shut-off valves
- Tanks are flanged mounted to pump casing
- Oil level sight glass
- Air operated mold purge circuit
- Fluid drain valve
- Fluid fill port
- Leak proof weldments
- Process Pump:
- Low pressure centrifugal pump
- Cast iron casing
- Bronze pump impeller
- Water cooled pump seal
- Stainless steel pump motor
- Heater:
- Flanged bolt-in mount
- Vertical orientation
- Steel heater sheath
- Cabinetry:
- Stainless steel cabinetry with lift-off cover panel
- Hinged electrical cabinet door
- Portable, on casters
- Galvanized steel base
- Limits:
- Water supply pressure switch
- Motor overload relay
- Pressure relief valve (water)
- High temperature limit
- System Alarms
- Audible & Visual Alarm
- Audible Alarm
- Cabinetry
- Rear cover panel
- Electrical
- Nema 12 construction
- Special electrics
- Control Instruments
- Modbus TCP/IP
- T500 Series Control
Changes Model to RK-1230HC-T500
Regal G500 Series
- Easy to use menu driven controller
- LCD display
- Home screen includes continuous set point and to process temperature.
- % Heating or Cooling indication on home screen.
- Out-of-spec alarm including standard audible signal.
- Selectable °F or °C temperature display.
- Selectable SPI or Modbus RTU communication.
- For process fluid temperature up to 500°F
- Optional: Modbus TCP communication
Regal T500 Series
- Touch screen simplicity
- 4.3” full color touch screen interface
- More than 25 screens with custom set-up & system monitoring information.
- Home screen includes continuous set point and to process temperature.
- % Heating or Cooling indication on home screen.
- Out-of-spec alarm including standard audible signal.
- Pump rotation monitor.
- Selectable English or Spanish language display.
- Selectable °F or °C temperature display.
- Selectable SPI or Modbus RTU communication.
- For process fluid temperature up to 500°F
- Optional: Modbus TCP communication
Model RK-1230HCA shown.
Image is typical. Actual unit appearance will vary according to specifications and options.
-
Need Application Assistance?
Our Experienced Team Can Save You Time & Money.
Tell Us About Your Project
Close
This site uses cookies to offer you a better browsing experience. Learn more about how Advantage Engineering, Inc. uses cookies by contacting the site
administrator at admin@advantageengineering.com By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.
Please refer to the Advantage Engineering Privacy Policy.
