CHECKMATE™ SYSTEM CONTROLS
For Pump Tank Stations
The new Checkmate™ System control is new technology for pump tank station control systems. Using the Up Arrow, Down Arrow, and the Select push
buttons, the Checkmate™ Display offers 13 screens of system information.
The new Checkmate™ Display Panel is a microprocessor based control system that monitors up to 2 process pumps and controls 6 outputs (tower fans). The Checkmate™ instrument monitors six process temperatures to accurately display system performance. The new LCD Screen offers 13 screen displays of system performance information on all aspects of pump tank station's operation and the performance of the plant's water distribution system.
CHECKMATE™ DISPLAY SCREENS
MAIN SCREEN
Displays the current To Process temperature in °F. The setpoint temperature is also displayed.
TEMPERATURE STATUS
Displays the From Process, To Process and From Tower temperatures. On chilled water installations, there is a From Chiller display instead of the From Tower
display (as shown in the photo).
PROCESS PUMP STATUS
Displays the on / off status of
the process pumps and operating hours of each motor .
CONTROL STATUS
Display the on / off status of the fans and controlled pumps and displays running hours of each motor.
SETUP
The operator can select this screen to enter the Setpoint Temperature, the Hi Alarm and
Low Alarm values. The Hi Alarm value is the number of degrees above the setpoint when the alarm will sound. The Lo Alarm temperature is the number of
degrees below the setpoint when the alarm will sound.
ALARM SCREENS
Displays the date, time and reason of system errors
SYSTEM TIME
Displays the set time function.
MORE INFORMATION
Checkmate™ Control Systems
PDF & HTMLDocuments covering the selection, service & operation of industrial cooling towers.
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277Privacy Statement and Terms of Use. Sitemap Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability. Products are assembled in the United States of America.
©1998 - 2008 ADVANTAGE ENGINEERING, INC