Air-Cooled Small Water Chiller
Model: M1-1A
Specifications
Have A Question?
Call 317-887-0729
for your answer.
Call 317-887-0729
for your answer.
--
PRODUCT SPECIFICATIONS
Model: M1-1A (1)
Capacity
(2) Tons:
1
kW:
3.5
Compressor
HP:
1
Type:
Hermetic Reciprocating
Process Pump
HP:
1/2
GPM:
2.4
PSI:
60
Type:
Positive Displacement
Construction:
Brass
Air-Cooled Condenser
Type:
Fan
CFM:
710
(3) Ambient
90°F
Refrigerant
Type:
R-134A
(4) Full Load Amperage
230/1/60:
15
Reservoir Capacity
Holding:
4 gal
Lid:
Standard
Auto Make-Up
Optional
Process Connections
To Process
1/2"
From Process
1/2"
Dimensions
Height:
37"
Width:
19"
Depth:
25"
(5) Weight
Shipping
345 lbs
Specification Notes::
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ " 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor manufacturer. Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
5. Approximate unit weight crated for shipment.
6. See Product Warranty Statement W-700 for details on warranty.
M1-1A (typical)
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277
Privacy Statement: we will not sell, rent or release any personal information you share with us to third party vendors. Sitemap
Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability.
Products are assembled in the United States of America.
Privacy Statement: we will not sell, rent or release any personal information you share with us to third party vendors. Sitemap
Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability.
Products are assembled in the United States of America.
© 2013 ADVANTAGE ENGINEERING, INC
Advantage Engineering Provides Industry Process Cooling Equipment For Optimizing Your Process