PORTABLE CHILLER
15 Tons : Specifications : Features : Options
Click Here For An Animated Schematic
STANDARD FEATURES (1)
FRAME CONSTRUCTION:
• Powder coated steel upright frame
• Galvanized steel cross frame
• Powder coated steel cabinetry
• Lift-off side panels
• Thermoformed ABS front fascia
• Compact physical size
• Castors - for portability
REFRIGERANT CIRCUIT:
• Scroll compressor
• Air-cooled condenser with finned tubes
• Propeller fan(s) induced air flow
• Refrigerant sight glass with moisture
indicator
• Filter-drier
• Liquid line solenoid valve
• Thermostatic expansion valve
• Brazed plate evaporator
COOLANT CIRCUIT:
• High Flow Centrifugal pump
• Large capacity insulated non-ferrous
reservoir (tank lid is standard on this model)
• Reservoir level sight glass
• Automatic water make-up system
• Standard NPT process fittings
• Low flow bypass valve
PRESSURE GAUGES:
• Refrigerant high pressure
• Refrigerant low pressure
• Coolant pressure
ELECTRICAL:
• Process pump motor starter
• Compressor motor contactor
• Fused transformer
• Power entry terminal block
SYSTEM LIMIT DEVICES:
• High pressure limit
• Low pressure limit
• Process pump motor overload
• Internal compressor overload
• Control circuit fuse
WARRANTY:
• 1 year covering parts and labor
Warranty Statement
INSTRUMENT
M1 Series (standard instrument)
• Continuous To Process temperature display
• Selectable Setpoint temperature display
• Illuminated ON/OFF power switch
• Soft touch Setpoint selection keys
• Bright and easy-to-read LED Temperature
display window
• Machine Status with Compressor and
Capacity Control indicating lights
• Basic Machine Diagnostics with Refrigeration
Fault indicating light
OPTIONS
CHILLER CONTROL INSTRUMENT : LE Series
• Continuous To Process and Setpoint temperature display
• Selectable From Process temperature display
• Temperature display in Fahrenheit or Celsius
• Status indicators for Power On, Compressor, Bypass/Unload,
Alarm, Reservoir Level, Freezestat, Refrigerant circuit, and Low Flow
• Soft key operators
• RS-485 SPI communications port
REFRIGERANT CIRCUIT:
• Compressor CPR valve (for setpoints above 65°F)
COOLANT CIRCUIT:
• Overhead piping kit : factory or field installed
• No reservoir tank for gravity return applications
• Process line shut-off valves
• Larger process pumps
SYSTEM SAFETY DEVICES:
• Audible alarm
• Visual / audible alarm beacon
WARRANTIES:
• Extended compressor warranty
ELECTRICAL:
• Branch circuit fusing
Immediate Online Pricing
for the M1-15AF
Registration Required.
Or Call 317-887-0729
to talk to a sales associate.
SPECIFICATIONS (1)
Model: M1-15AF
TONS:
KW:
COMPRESSOR
HP:
TYPE:
PROCESS PUMP
HP:
GPM:
PSI:
TYPE:
CONSTRUCTION:
CONNECTION SIZES
TO:
FROM:
WATER MAKE-UP:
AIR-COOLED CONDENSER
TYPE:
CFM:
(3) AMBIENT:
(4) FULL LOAD
AMPERAGE
230/3/60:
460/3/60:
575/3/60:
TANK CAPACITY
HOLDING:
LID:
AUTO MAKE-UP:
DIMENSIONS
Height:
Width:
Depth:
(5) WEIGHT
Shipping:
15
52.6
15
Scroll
3
36
55
Centrifugal
Stainless Steel
2"
2"
1/2"
Fan
15,000
95 °F
74
37
30
65 gal
Standard
Standard
66"
58"
70"
2,300 lbs
Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liabililty.
Selection of certain optional features may change listed specifications.
2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor
manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40. The minimum recommended
operating temperature when no glycol is used is 48°F.
3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
5. Approximate unit weight crated for shipment.
6. See Warranty Statement #W-700 for details.
Knowledge Base Knowledge Base
PDF & HTMLDocuments covering the selection, service & operation of portable liquid chillers.
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277Privacy Statement and Terms of Use. Sitemap Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability. Products are assembled in the United States of America.
©1998 - 2009 ADVANTAGE ENGINEERING, INC