MAXIMUM PORTABLE LIQUID CHILLERS
with Propeller Fan or Centrifugal Blower

ADVANTAGE Maximum portable liquid chillers with 15 and 20 tons capacity are available with air flow induced by propeller fans or a centrifugal blower. This page compares the two types.

HOW ARE THEY SIMILAR?
Both the Propeller fan and Centrifugal Blower types are packaged in the same frame. Each unit provides 15 or 20 tons of cooling capacity. The dimensions of each unit is 96" x 58" x 70" (HxWxD). Other than the mechanism used to generate the air flow through the condenser, these units use the same refrigerant components and coolant circuit components, including compressor and coolant pump. The air volume each unit produces is the same at 15,000 CFM. The MK-LE instrument is standard for both units, with optional upgrade to the HE instrument.

HOW ARE THEY DIFFERENT?
The propeller fan unit uses a 3HP motor to drive the fan, whereas the bower unit uses 7.5 HP motor to drive the blower. The propeller fan unit can not be ducted for air distribution or ventilation, where the blower unit can be.

MK-15A shown with fan.

SPECIFICATIONS

Model: MK-15A with Fan
Capacity: 15 tons
Dimensions: 96" x 58" x 70" (HxWxD)
Air Volume: 15,000 CFM
Air Pressure: 0 inches of water*
Can Discharge be Ducted? No
Motor HP: 3
Unit Amps at 460/3/60: 37

*At discharge

MK-15A with blower.

SPECIFICATIONS

Model: MK-20A with Blower
Capacity: 15 tons
Dimensions: 96" x 58" x 70" (HxWxD)
Air Volume: 15,000 CFM
Air Pressure: 1.35 inches of water*
Can Discharge be Ducted? Yes
Motor HP: 7.5
Unit Amps at 460/3/60: 43

*At discharge

MORE INFORMATION
Maximum Air-Cooled
5-30 Tons

General Product Information

Standard Features
and Options

Pricing And Specifications