Step #1:
Condenser
What is an Air-Cooled Condenser?
What is a Water-Cooled Condenser?
AIR-COOLED CONDENSERS
Air-cooled condensers dissipate process heat to ambient air around the chiller or outside if equipped with an outdoor remote condenser.
[Close]
Air-cooled condensers dissipate process heat to ambient air around the chiller or outside if equipped with an outdoor remote condenser.
[Close]
WATER-COOLED CONDENSERS
Water-cooled condensers dissipate process heat to an external water source. A common source is Tower water. [Close]
Water-cooled condensers dissipate process heat to an external water source. A common source is Tower water. [Close]
Step #2:
Configuration
Configure Selection Menu will appear after submiting Condenser Selection.
CENTRAL CHILLING PACKAGE
Packages are complete single or multi zone chillers with a process and evaporator pumping system on single skid.
[Close]
Packages are complete single or multi zone chillers with a process and evaporator pumping system on single skid.
[Close]
CENTRAL CHILLING MODULE
Modules are single or multi zone chillers which require a separate pumping system to distribute chilled water.
[Close]
Modules are single or multi zone chillers which require a separate pumping system to distribute chilled water.
[Close]
PACKAGE OUTDOOR
Outdoor package chillers are single or multi zone chillers with a process and evaporator pumping system on single skid designed for outdoor installation in many types of climates.
[Close]
Outdoor package chillers are single or multi zone chillers with a process and evaporator pumping system on single skid designed for outdoor installation in many types of climates.
[Close]
Step #3:
Capacity
Capacity Selection Menu will appear after submiting Condenser Selection.
CAPACITY
Capacity is a measure of the chiller's ability to remove heat from the process and is expressed as 'Tons' or 'KW'. 1 Ton of capacity is the removal of 12,000 BTUs or 3.5 KW per hour. For example, a 30 ton chiller will removed 360,000 BTUs or 105 KW from the process per hour. [Close]
Capacity is a measure of the chiller's ability to remove heat from the process and is expressed as 'Tons' or 'KW'. 1 Ton of capacity is the removal of 12,000 BTUs or 3.5 KW per hour. For example, a 30 ton chiller will removed 360,000 BTUs or 105 KW from the process per hour. [Close]
ZONES
A chilling zone is a complete set of mechanical, electronic and control components assembled to provide chilled water. Central chillers have Single or Multple Zones. Multiple zones add redunancy. [Close]
A chilling zone is a complete set of mechanical, electronic and control components assembled to provide chilled water. Central chillers have Single or Multple Zones. Multiple zones add redunancy. [Close]
CONSULT FACTORY
Components for 230 volt units are normally hard to find and have increased cost. Pricing for 230 is one a unit by unit basis.
[Close]
Components for 230 volt units are normally hard to find and have increased cost. Pricing for 230 is one a unit by unit basis.
[Close]
Step #4:
Contact
If not registered, an online form is presented. Once submitted, the immediate price quote is presented.
Step #5:
Quote
Your immediate price quote will be displayed after selecting
• Condenser
• Configuration
• Capacity
and submitting the
contact form.
for more information.
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277