CENTRAL CHILLER
60 Tons : Titan Series : Specifications, Features & Options
Titan Series multi zone water-cooed process liquid chillers provide chilled fluilds between
20°F and 70°F.
Click to view larger image.
STANDARD FEATURES
RESERVOIR:
• Seemless rotationally molded polyethylene
• Insulation
• Drain valve
• Overflow port
• Hot / cold section baffle
• Structural base
• Pump decking
• Automatic water level control
• Spare pump ports
• Hinged tank cover
REFRIGERANT CIRCUIT:
• Scroll compressor
• Compressor suction service valve
• Compressor discharge service valve
• Brazed plate evaporator
• Water-cooled condenser
- with regulator valve
- with manifold with isolation valves
- with removable heads
• Liquid line solenoid valve
• Refrigerant sight glass with
moisture indicator
• Thermostatic expansion valve
• Capacity control via hot gas bypass
• Non-Ozone depleting refrigerant
COOLANT CIRCUIT
• Large capacity process pump
- Suction service valve
- Discharge service valve
• Evaporator pump
- Suction service valve
- Discharge service valve
LIMIT DEVICES (per zone)
• Refrigerant high pressure
• Refrigerant low pressure
• Evaporator flow
• Instrument circuit fuse
PRESSURE GAUGES (per zone)
• Refrigerant high Pressure
• Refrigerant low Pressure
•Coolant pressure
WARRANTY (US & Canada)
• 1 year parts and labor
• 2nd year complementary
preventative maintenance visit
CONTROL INSTRUMENT
Learn More about this instrument.
• Microprocessor based multizone controller
• Intelligent zone boards
• Compressors are staged individually
• Continuous To Process temperaturedisplay
• Continuous Setpoint temperaturedisplay
• Selectable from processtemperature display
• Large temperature display windows
• °F or °C temperature display
• Refrigerant circuit indicators for Probe, Low Flow, High Pressure, Low Pressure, Compressor,Freezestat, Capacity Control
• Water circuit indicators for Temperature Deviations, Low Pressure, Tank Level, Probe, Phase
• Selectable lead - lag mode
• Soft Key Operators
• SPI communications
• Audible and visual alarm
OPTIONS
FRAME
• Special Paint
• Stainless Steel Reservoir
• Epoxy coated mild steel reservoir
REFRIGERANT CIRCUIT
• Compressor CCPR valve
• Compressor hour meter
COOLANT CIRCUIT
• Larger process pumps
• Standby pump and manifold
CHILLER CONTROL INSTRUMENT
• Remote display kit
• PLC with touch screen display
WARRANTIES
• Extended compressor warranty
ELECTRICAL
• UL listed electrical panel
• Disconnect
SPECIFICATIONS
Model: TI-60W
Quantity:
COMPRESSOR
Quantity:
HP:
Type:
(1) Total Capacity:
(2) (3) PROCESS PUMP
HP:
GPM:
PSI:
EVAPORATOR PUMP
HP:
GPM:
CONNECTION SIZES
To Process:
From Process:
Make-Up:
Overflow:
Condenser:
WATER-COOLED
CONDENSER
(4) From City:
(5) From Tower:
(6) (7) FULL LOAD
AMPERAGE
230/3/60:
460/3/60:
575/3/60:
REFRIGERANT
Type HFC:
RESERVOIR CAPACITY
Operating:
Holding:
DIMENSIONS
Height:
Width:
Depth:
(8) WEIGHTS
Shipping:
Operating:
2
4
15
Scroll
60 tons
10
180
65
3
144
4"
4"
1"
4"
3"
90 GPM
180 GPM
256
128
103
R-407C
350 gal
450 gal
82"
92"
96"
5,155 lbs
9,515 lbs
Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liabililty.
Selection of certain optional features may change listed specifications.
2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/5% as reserved by
the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40.
The minimum recommended operating temperature when no glycol is used is 48°F.
3. Consult pump curve for exact pump performance.
4. Flow rate (GPM) is based on 60°F city water source with a clean condenser.
5. Flow rate (GPM) is based on 85°F tower water source with a clean condenser.
6. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
7. Consult factory for 50HZ operation.
8. Unit weight crated for shipment.
9. See Warranty Statement #W-700 for details.
PDF & HTMLDocuments covering the selection, service & operation of central liquid chillers.
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277Privacy Statement and Terms of Use. Sitemap Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability. Products are assembled in the United States of America.
©1998 - 2010 ADVANTAGE ENGINEERING, INC