Air-Cooled Water Chiller
Model: OACS-120D-MZC-2P
Specifications
Have A Question?
Call 317-887-0729
for your answer.
Call 317-887-0729
for your answer.
--
PRODUCT SPECIFICATIONS
Model: OACS-120D-MZC-2P (1)
Refrigerant Zones
Quantity:
2
Capacity
(2) Type
119.5
kW:
419.3
Compressor
Type:
Tandem Scroll
Refrigerant
Type:
R-410A
Air-Cooled Condenser
# of Fans
10
Evaporator
Type:
Brazed Plate
Process Pump
(3) HP:
20
(4) GPM:
288
PSI:
69
Evaporator Pump
(3) HP:
7.5
(4) GPM:
288
Standby Pump
Offered:
Available
Reservoir Capacity
Capacity:
350 gal
(5) Construction
SS
Connection Sizes
Type:
Flange
Size:
4"
(6) Dimensions
Height:
99"
Width:
96"
Depth:
296"
Controller
Instrument Type:
MZC
(7) System Amperage
460/3/60:
327.6
Specification Notes::
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ 115°F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. Capacity multipliers are 50°F - 1.00 ; 40°F - .80 ; 30°F - .60 ; 20°F - .40. The minimum recommended operating temperature when no glycol is used is 48°F.
3. Consult pump curve for exact pump performance.
4. Selection of optional pumps for higher flow rates will raise the minimum recommended operating temperature when no glycol is used.
5. PE = polyethylene; SS = stainless steel; MS = epoxy coated mild steel.
6. Approximate dimensions. Not for construction purposes.
7. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
8. See Product Warranty Statement W-700 for details on warranty.
OACS-120D-MZC-2P shown with integral air-cooled condenser.
Image shown is typical. Actual unit apparance will vary according to specification and options.
Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277
Privacy Statement: we will not sell, rent or release any personal information you share with us to third party vendors. Sitemap
Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability.
Products are assembled in the United States of America.
Privacy Statement: we will not sell, rent or release any personal information you share with us to third party vendors. Sitemap
Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability.
Products are assembled in the United States of America.
© 2013 ADVANTAGE ENGINEERING, INC
Advantage Engineering Provides Industry Process Cooling Equipment For Optimizing Your Process