Air-Cooled Glycol Chiller

• Advantage BC & BG Series air-cooled chillers use mechanical refrigeration to cool recirculating fluid that support industrial process cooling applications.
• Glycol chillers are configured to produce fluid temperatures between 25°F - 30° using a mixture of water & glycol to prevent the fluid from freezing but can also be adjusted to produce fluid temperature as low as 20°F and as high as 70°F.
• Air-cooled chillers use ambient air to dissipate the heat from the refrigeration system.
• BC models are designed for indoor installation.

BC-25A
• Compressor
• Horsepower : 25
• Type : Scroll
• Cooling Capacity
• (2) Glycol Temperature @ 25°F : 149,456 BTU/hr
• (3) Glycol Temperature @ 50°F : 294,000 BTU/hr
• Process Pump
• HP : 5
• GPM : 60
• PSI : 59
• Type : Centrifugal
• Construction : Stainless Steel
• Air-Cooled Condenser
• Type : Blower
• CFM : 25,000
• (8) SP : 1.35
• (4) Ambient : 95°F
• Refrigerant
• Type : R-410A
• Full Load Amperage (5)
• 230/3/60 : 158
• 460/3/60 : 79
• 575/3/60 : 63
• Reservoir Capacity
• Holding : 65 gal
• Lid : Standard
• Process Connections
• To Process : 2"
• From Process : 2"
• Construction
• Electrical : Nema 1
• Installation Area : Indoor
• Ambient Range : 60°F - 95°F
• Dimensions
• Height : 96"
• Width : 58"
• Depth : 70"
• Weight (6)
• Shipping : 2,800 lbs

• Specification Notes:
• 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
• 2. Capacity at 25°F LFT and 115 °F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. The minimum recommended operating temperature when no glycol is used is 48°F.
• 3. Capacity at 50°F LFT and 115 °F condensing temperature. Capacities may be +/5% as reserved by the compressor manufacturer. The minimum recommended operating temperature when no glycol is used is 48°F.
• 4. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
• 5. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
• 6. Approximate unit weight crated for shipment.
• 7. See Product Warranty Statement W-700 for details on warranty.

• Manual
• 
• Download
• 70 pages
• 5.8 MB

• Literature
• 
• Download
• 4 pages
• 1.1 MB

• Specifications
• 
• Download
• 2 pages
• 475 KB

BC-25A

Image is typical. Actual unit appearance will vary according to specifications and options.

-