Advantage Electronics, http://www.advantageelectronics.com, a company affiliated with Advantage Engineering recently introduced its XK Monitor system which allows monitoring of up to 12 Advantage Sentra temperature control units from 1 convenient location.
The XK Monitor system is particularly useful when multiple temperature control units are located away from the operator. Install the XK Monitor and all the information is available at one convenient panel.
Advantage Electronic XK Monitor System FYI-297.
Contact Advantage Electronics at 317-888-1946 for more information.
Follow this link for more information
Has the recent hot weather taxed the performance of your air-cooled chiller? Operating efficiency of an air-cooled chiller drops off quickly when temperatures soar above 95°F and can even cause the unit to shut down if it gets too hot. What can you do to regain chiller efficiency?
Advantage Model M1D-10A, 10-ton portable air-cooled chiller shown with adiabatic pre-cooling system to provide full capacity during hot weather.
Advantage now offers an engineered packaged adiabatic pre-cooling system for its portable chillers that is easily retrofitted and will drop the incoming air temperature at the condenser by 10-15°F regaining previously lost capacity..
The system is quite simple, install the stainless steel frame work on the chiller, insert the evaporative media, fill the system with water and turn on the recirculating pump. The pump takes water from the integral storage basin, and distributes it over the wetted media. Hot air moving across the wetted media evaporates some of the water from the wetted media dropping the air temperature before it enters the chiller condenser coil providing vastly improved performance. Contact your Advantage representative for more information.
Adiabatic pre-coolig system showing wetted media removed.