FAQ

Frequently Asked Questions

Question:

What is the parameter "int" used for in the advanced setup area of Sentra temperature control units with the HE microprocessor control instrument.

Answer:

"int" is used to calibrate the flow meter. It is calibrated before shipping. Do not adjust the "int" unless you have a known flow meter to calibrate to.

If you have questions about your specific unit can you provide the serial number of the unit so that our service personnel can know exactly what you own. Feel free to call us at 317-887-0729 and ask for service.

Close Window

• How do you figure what size the tank should be on a pump tank station?

• In a refrigeration system, how many BTU's are needed to reduce the temperature of 400 gallons of water from 70°F to 45°F. Also, how many BTU's are needed to drop the water temperature each 1.0°F.

• I want to use Modbus to communicate to my Advantage Sentra Model SK-1035HE. So far I've been able to read the set point but I haven't been able to change the set point. Should I be able to write to the same register that I read the set point from ?

• What software is needed to get data from Water Units with HE Series Instruments?

• Do You Have An Online Ordering System?

• What kind of sensor probes are used in the Sentra series temperature control units and how are they calibrated?

• What is the parameter "int" used for in the advanced setup area of Sentra temperature control units with the HE microprocessor control instrument.

• Is there any paramter on the temperature controller SK-1035-HE which controls the flow in the process or may I control the flow process any other way?

• Can Your Chillers Be Used To Provide Ingredient Water For Dough Production?

• Can Your Chillers Be Used In Food & Beverage Processing Applications?

• I Need A Spare Parts List - How Do I Get One?

• I Need To Order Parts - Tell Me What To Do.

• Do You Have Spanish Manuals and Literature?

• How Do I Get An Electrical Drawing for My Advantage product?

• How Do I Keep My Chiller Running at Capacity During Hot Weather?

• What Will Happen To My Chiller When R22 is No Longer Available?

Advantage Engineering, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-0729 Fax: 317-881-1277
Privacy Statement: we will not sell, rent or release any personal information you share with us to third party vendors. Sitemap
Product innovation and improvement is our constant goal. All features, specifications and pricing are subject to change without notice or liability.
Products are assembled in the United States of America.

Advantage Engineering Provides Industry Process Cooling Equipment For Optimizing Your Process